A New Darkroom!! II.

    The biggest challenge in building this room is the walls.  The current walls were left with open studs and visible tar paper, which had developed large holes from previous tenants nailing things, which is definitely no good for a darkroom.  So, we will be upgrading the structure a bit by building new, insulated, sheetrocked, and taped walls.  There was also a bit of electrical work to be done:  There was only one light, whose switch was to the right of the garage door (horribly inconvenient).  We moved the switch to the interior of the space, and added and rewired some electrical sockets, which you'll see later.
    We never use the garage door at the front so we just decided to wall it off, which meant removing the tracks for the door, building and insulating a wall and even a portion of the ceiling, which was difficult since it came up at an angle from the top of the door.  We also added a layer of plastic to add additional weatherproofing to the numerous holds in and around the door frame.  Boy oh boy has this been a LOT of work!!

 

    To stabilize the walls we needed to shoot bolts through the floor tracks and into the cement foundations.

 

    This is a shot from the interior of the room.  Thankfully the one wall that divides the garage from the house is solid enough that we don't have to build a new one.

Here you can see the current stage of the room, which is floating and taping all the seems between the sheet rock and filling in any holes we created while drilling them into the studs.

 This angle of the garage is the same angle as I showed in the previous darkroom post that you can see here.  There was no source of light for this side of the room, so we had to add two florescent lights in the ceiling, as well as adding some plug sockets near the bottom.

There is still at leas one solid weekend of work to do before the room is useable, but Gavin and I work well together and can get a lot of things done when we set our minds to it.  I am a little worried I have overstretched myself a bit, with taking Image Synthesis AND trying to complete the lighting work on the short film Sleddin', but hopefully it will work out great and I can make some rockin' art!

The Darkroom is Complete!

Here it is!  This finished darkroom.  The final touches were stapling the internet cable along the bottom of the wall and filling in the light leak from the hole it came through and a few smaller light leaks that remained around the windows.  I discovered when light directly hit the side of the house the foam board actually became semi-translucent when your eyes adjusted to the dark, so we ended up having to put some of the ram board we bought for the floor over the foam board, and then just for good measure put some foil tape around the perimeter just to make sure absolutely no light would creep in.  I mixed the developer and fixer in two tupperware like pitchers with airtight seals, which I believe should be safe enough for the chemicals.  The one Patterson safelight that I bought isn't quite strong enough to give me enough light to work in, so I'm going to hit up a photo supply store out in Houston for a bulb that I can put into a standard lamp, which should give me the illumination I need.

 We ended up having to reverse the swing of the door into the room because it was too difficult to come in and out without disturbing the curtains, which was a light leak threat.  This way you are able to open the door, step into the light lock, close the door behind you, and then go through the curtains.

And here is my first attempt at photogramming!  For whatever reason, either proximity to the light or the intensity of the bulb, the paper seems to be ultra sensitive.  My first attempts at doing exposure strip tests at 1 second intervals produced completely black strips.  This image was created literally turning the lamp on and off almost instantaneously.  I think tomorrow I'm going to go back to Home Depot and get a much smaller bulb at the lowest wattage I can find and test that out to see if I can get a little more flexibility with the timing.  I created the image using my hand and shreds of a plastic Walmart bag, and painting the developer onto standard photo paper.  Because the paper has such a high gloss, the developer tended to pool in little puddles, which is where the white holes in the image come from.  Also, a bit of a happy accident, the words printed on the bag just happened to appear directly parallel to my arm.  There is something very appealing about that in combination with the form of a hand grasping through the silhouettes of the plastic bags...I think I'll explore some of that later.

Building the Darkroom

This week I gathered materials to convert the spare bedroom in the house to a darkroom.  The biggest challenge for this project was going to be sealing off all the windows to prevent light leakage and constructing some sort of entry/exit mechanism to lightproof the area around the door.

So first we cleared most of the furniture and clutter our of the room and off the walls, leaving the desk so I would have somewhere to put the trays of chemicals I will need to use for the photograms.

Sealing the windows was actually fairly easy.  All we needed to do was buy some insulated weatherproof board, cut it slightly bigger than the height and width of the window, screw it into the drywall, and caulk around the edges.  That created a good enough seal to keep out the light.  For this window in particular, we will later be installing a standard bathroom vent type device to ensure good ventilation.  For that, we would need to keep the window slightly cracked at all times (which is why we got the weatherproof board, and cut a small hole in the bottom of the foam board so that the vent can suck air through the space in between the board and the window.  Since the mechanism for the vent will be outside and going over the window, we should be able to seal the edges in a similar way to prevent light leaks.

For the door, we bought some PVC pipe and blackout curtain material that we made two makeshift quarter-circle drapes out of.  To mark where the drapes were going to go, we held a Sharpie against the door and let it mark the ceiling as we opened and closed it to see the area the door would need to travel.  We ended up having to break the pvc pipe in a few places to get the curve we wanted, so to hold the pieces together we threaded some rope through the pipe and then rolled the curtain over to lock it in place.  We then screwed the pipe into the ceiling with drywall lock screws and attachments and attached the sides of the curtains to the drywall by screwing them into some spare pieces of board we had laying around.  Against the bottom of the door we attached a weatherproofing strip so that no light could leak in through the bottom of the door, where a large hole had been chewed by a mouse at some point or another.

This is the desk that we left in the room to use as a worktable.  The three plastic bins near the wall are what I will be using to store the chemicals and paintbrushes while I'm working.  To the left of the table you can see a large roll of thick brown cardboard.  I'm going to use this to protect the floor by laying out overlapping strips along the ground and stabilizing it by taping it down with blue painter's tape.  The cardboard was relatively cheap so it will be fairly inexpensive to replace and easy to keep clean.

There are a few remaining things to be done, such as the red lighting arrangement and storage for the chemicals, but those will have to wait until my shipments of these materials arrives next week.  Once the floor and vent are installed and all my materials arrive I'll be ready to start making some art!